1991 Accord Distributor Dissassembly Question

Hi,

My daughter's 1991 Accord suddenly quit, and it appears it has no spark. A
poster here sent me what I think is an "igniter", a 1/4" thick sealed
electrical component about 1.25" square with several electrical terminals.
I want to try this to see if the replacement component will fix the problem.
But, I am having trouble getting the component out! Should I remove the
entire distributor, or if left in the car, just what has to be removed to
effect the replacement?

Thank you,

- Phil

Take the dist out of the car. Scratch a line across the dist housing to
the head so you don't have to reset the timing. Mark where the rotor
points before you take it out, so you can get it back in right. ( Only
goes back in one way anyhow) bob

Phil wrote:
>
> Hi,
>
> My daughter's 1991 Accord suddenly quit, and it appears it has no spark. A
> poster here sent me what I think is an "igniter", a 1/4" thick sealed
> electrical component about 1.25" square with several electrical terminals.
> I want to try this to see if the replacement component will fix the problem.
> But, I am having trouble getting the component out! Should I remove the
> entire distributor, or if left in the car, just what has to be removed to
> effect the replacement?
>
> Thank you,
>
> - Phil