Welcome to AutoBoardz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

1990 HB 4cyl mt king cab

 
   AutoBoardz (Home) -> Nissan RSS
Next:  Merry Christmas!  
Author Message
CBX2

External


Since: Jan 24, 2006
Posts: 44



(Msg. 1) Posted: Mon Dec 24, 2007 9:53 pm
Post subject: 1990 HB 4cyl mt king cab
Archived from groups: alt>autos>nissan (more info?)

I want to add an oil pressure and water temp gauge (probably Glowmeter
temp and Sunpro pressure) what size is the hole for the stock sending
unit.Most gauges come with a 1/8? NP thread?







There are no happy endings
JUST ENDINGS

 >> Stay informed about: 1990 HB 4cyl mt king cab 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Headliner 97 King Cab - Any kind of quick fix for Headliner separation in a few small spots? It has not gotten bad yet but I would like to stop it before it gets worse, if possible. TIA Best, Saml

88 Nissan King Cab Z24 Engine .. Need help with diagnosing.. - I am trying to use the ECU to diagnose a problem with my truck. It will crank but will not start. When I turn the ignition, there is no sound of the fuel pump powering up. So I have a feeling it is the fuel pump that is the problem. I see when I look at....

1990 240SX Won't Start - I need your expertise. The car had been running fine, but now it will not start turning the key, but will start with a push and popping the clutch. Thought it most likely was the starter, so I pulled it and had it tested. Of course it and the solenoid...

1990 HB horn - My shop manual shows 2 horns and two connectors one for each horn.Each comes out of the turn signal wire harness.My truck only has one horn on the driver side.The passenger side has no horn.It has the mounting hole for the screw but no horn.The harness..

1990 D-21 KC pu mt - Nee d the volumes for rear end oil and MT oil.Shop manul says 2 pints for MT and 1 1/2 Qts for the rear but that seems low compared to my 86 1/2? 12 MILLION PEOPLE CAN'T BE WRONG BIG" L"
   AutoBoardz (Home) -> Nissan All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]