1985-87 BMW 325

http://BMW-325.autoboardz.com/1986-BMW-325-500-ftopict227099.html (FS - 1986 BMW 325 for $500)
Good parts car or project car. Runs but needs mechanical and body work. Never wrecked. Car is in Pekin, Illinois. Details at

http://BMW-325.autoboardz.com/Help-87-BMW-325-Trunk-ftopict227093.html (Help 87 BMW 325 Trunk)
Hi, my trunk will not oipen For some reason the lock will not open the trunk. I turn the key and it turns freely, but will not open. Is there any way for me to get into my trunk? Thanks Greg
« "Greg":  ;> Hi, my trunk will not oipen For some reason the lock will not open the  ;> trunk. I turn the key and it turns freely, .. »
« I had one break like this. Managed to drill a small hole and pop the lock by removing the license plate. I recommend you go to a used car .. »
« Doug, thanks for responding, your problem sounds like what I have. I'm not following the drill the hole thing. When I am looking for where.. »

http://BMW-325.autoboardz.com/87-BMW-325-Cutting-Stalling-ftopict227111.html ('87 BMW 325 Cutting Out / Stalling)
Hey all, I need some help. My car is running fine, and idles great, but at seemingly random times the engine will just stop! There's no noises, no nothing. Everything else seems to be OK. The speed ..
«  ;> I need some help. My car is running fine, and idles great, but at  ;> seemingly random times the engine will just stop! There'.. »
« Thanks for the advice. I've ordered some relays and should have them within a few days. I'll have to look for those. I'm not sure I have t.. »

http://BMW-325.autoboardz.com/BMW-325-turn-signal-flasher-ftopict227118.html (BMW 325 turn signal flasher)
'87 325i - the flashers/turn signals qiut. Got a replacement 3-prong signal module but can't find where it plugs in. Have been told it's under the dash close to the steering column. Anybody able to ..
« Turn the Emergency Flashers ON so that the flasher thingie clicks, the Turn Signal Flasher is right next to it. "BNA 325": »

http://BMW-325.autoboardz.com/87-BMW-325-oil-pan-ftopict227091.html (87 BMW 325 oil pan)
Hi, I have a 1987 325 with a crack in the oil pan. The crack is located on the bottom of the pan, would someone please tell me how I can fix or replace this without removing the engine? Greg
« That's an easy one. Remove the cracked oil pan and either replace it, or have it TIG welded. Brett Anderson KMS http://www.koalamotorsport.com "G.. »
« "Brett Anderson":  ;> That's an easy one.  ;>  ;> Remove the cracked oil pan and either replace it, or have it TIG welded. &nb.. »

http://BMW-325.autoboardz.com/Help-87-BMW-325-Oil-pan-cracked-ftopict227092.html (Help 87 BMW 325 Oil pan cracked)
Hi, I have a 1987 325 with a crack in the oil pan. The crack is located on the bottom of the pan, would someone please tell me how I can fix or replace this without removing the engine? Greg
« "Greg":  ;> Hi, I have a 1987 325 with a crack in the oil pan. The crack is located on  ;> the bottom of the pan, would someone pl.. »
« "Bob Smitter":  ;>  ; ;> > Hi, I have a 1987 325 with a crack in the oil pan. The crack is located on  ; ;> > the b.. »

http://BMW-325.autoboardz.com/1987-BMW-325-Repair-Manual-needed-help-ftopict227149.html (1987 BMW 325 - Repair Manual(s) needed - Please help)
Please post (or direct me to) any repair manuals, schematics, diagrams, or any related articles or materials for the repair and maintenance of a 1987 BMW 325. Any help is greatly appreciated! TIA

http://BMW-325.autoboardz.com/1985-BMW-325-Michigan-USA-worth-ftopict227106.html (1985 BMW 325 in Michigan (USA)how much is it worth?)
I'm looking at a 1985 BMW 325e that has sat out in a parking lot for the last 6 months. The owner says that the rear end has gone out on it. It has 165,000 miles on the original motor. It has a stan..
« Steve:  ;> I'm looking at a 1985 BMW 325e that has sat out in a parking lot for  ;> the last 6 months. The owner says that the rea.. »

http://BMW-325.autoboardz.com/buying-1987-BMW-325-261-000-miles-risky-ftopict227088.html (Is buying a 1987 BMW 325 with 261,000 miles risky?)
HI, What do you think of this deal. 1987 325 261K miles, new transmission at 200K (5 speed manual), 4 new michelin tires, wear as you would expect for an older car, no rust, paint peeling in one s..
« "Greg Kirk":  ;> HI, What do you think of this deal.  ;>  ;> 1987 325 261K miles, new transmission at 200K (5 speed manual), 4.. »
« Just leave it. The repair costs are going to exceed the purchasing cost. If the engine needs long cranking time, this means that pressure .. »
« "GT":  ;> Just leave it. The repair costs are going to exceed the purchasing cost.  ;> If the engine needs long cranking time, thi.. »

http://BMW-325.autoboardz.com/1985-1986-BMW-325e-equipped-check-engine-light-ftopict227131.html (Is a 1985/1986 BMW 325e equipped with a check engine light?)
Is a 1985/1986 BMW 325e equipped with a check engine light? I have had a problem with obtaining a SMOG certificate because the "check engine" light did not come on. All other emission tests have p..
« : Mine is, and it should come on before you start the engine. That's probably what your inspector looked for and why it failed. It shoul.. »

http://BMW-325.autoboardz.com/BMW-325-528-air-flow-motor-mid-late-80s-excellent-ftopict227086.html (FA: BMW 325 or 528 air flow motor, mid-late 80s- excellent)
Air flow motor for BMW 325s and 528s from the mid- to late 1980s, in perfect working condition. Part # 0280202083-17105399 or

http://BMW-325.autoboardz.com/1987-325-Vibration-Transmision-replacement-ftopict232395.html (1987 325 is - Vibration after Transmision replacement)
Hey Folks, I just had my automatic transmission replaced. At about 20-25 MPR a loud vibration starts between the center console and the passenger seat. At first I thought it was something in the pas..
« "Lance Reichert": It sounds like your mechanic seperated the driveshaft while it was out and didn't put it back together in the correct or.. »
« Lance Reichert: Were you billed for a new guibo? It might have been a good idea just to replace it when he was in there. Another possibil.. »
« I agree, the first thing that springs to mind would be the propshaft. Although, I would have expected more of a vibration at around 60MPH.. »