Welcome to AutoBoardz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

1978 dodge 360 HELP

  
   AutoBoardz (Home) -> Dodge RSS
Related Topics:
95 dodge ram 2500 - Truck has just had batteries replaced and cable replaced. Problem still persists that after glow plug light goes out I engage the starter and the voltage drops to @8 volts and a clicking sound is heard. I can continue to try to start it and it..

1985 Dodge ram 100 - I've been to every junk yard in the lower mainland looking for parts for my 1985 Dodge D-100 and can't seem to find any parts anywhere does anyone know where one can get parts

2000 dodge ram 1500 4x4 - replaced the position sensor and now the timing is off. What do I do now?

help with my dodge please - about one week ago I tried to start my truck. nothing it just clicked ..so i put some dry gas in and heated the truck up and nothing so i looked at the plugs and replaced them. it started right up no problem. as i was driving it chugs. the more i..

99 dodge ram - Hello I have a problem thought it was a three hundred fuel pump wrong Thought it was a six hundred Pcm pin was burnt replaced and wrong Atl is bad and I am going to replace it now heres the big Q. could the alt burn the pin cause if this is not the..
Next:  Dodge: Durango A/C compressor question  
Author Message
bozo

External


Since: Jun 04, 2008
Posts: 2



(Msg. 1) Posted: Wed Jun 04, 2008 5:14 pm
Post subject: 1978 dodge 360 HELP Get Alert
Archived from groups: alt>autos>dodge>trucks (more info?)
I pulled the 2v carb on this truck today..in hopes of rebuilding the
carb. Looking down inside the manifold I see a threaded plughole..1"
maybe....no plug in it and lower on the other side another plug hole
maybe 3/4''.
Anybody know what these are for and if they are supposed to have at
one time had plugs in them?
The carb has never been off the truck since 1978.
TIA
Jim

 >> Stay informed about: 1978 dodge 360 HELP 
Back to top
Login to vote
Mike

External


Since: May 29, 2008
Posts: 7



(Msg. 2) Posted: Thu Jun 05, 2008 12:00 am
Post subject: Re: 1978 dodge 360 HELP Get Alert [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
"bozo" <sbozo RemoveThis @aol.com> wrote in message
news:edf0fe25-38b1-49d5-9c6c-4b54815eeb4f@h1g2000prh.googlegroups.com...
>I pulled the 2v carb on this truck today..in hopes of rebuilding the
> carb. Looking down inside the manifold I see a threaded plughole..1"
> maybe....no plug in it and lower on the other side another plug hole
> maybe 3/4''.
> Anybody know what these are for and if they are supposed to have at
> one time had plugs in them?
> The carb has never been off the truck since 1978.
> TIA
> Jim


Those passages are for the EGR system, don't mess with them.

 >> Stay informed about: 1978 dodge 360 HELP 
Back to top
Login to vote
bozo

External


Since: Jun 04, 2008
Posts: 2



(Msg. 3) Posted: Thu Jun 05, 2008 5:37 am
Post subject: Re: 1978 dodge 360 HELP Get Alert [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Jun 4, 10:00�pm, "Mike" <nos... RemoveThis @nospam.com> wrote:
> "bozo" <sb... RemoveThis @aol.com> wrote in message
>
> news:edf0fe25-38b1-49d5-9c6c-4b54815eeb4f@h1g2000prh.googlegroups.com...
>
> >I pulled the 2v carb on this truck today..in hopes of rebuilding the
> > carb. Looking down inside the manifold I see a threaded plughole..1"
> > maybe....no plug in it and lower on the other side another plug hole
> > maybe 3/4''.
> > Anybody know what these are for and if they are supposed to have at
> > one time had plugs in them?
> > The carb has never been off the truck since 1978.
> > TIA
> > Jim
>
> � �Those passages are for the EGR system, don't mess with them.


Thanks Mike....I wont mess with them LOL
 >> Stay informed about: 1978 dodge 360 HELP 
Back to top
Login to vote
Display posts from previous:   
   AutoBoardz (Home) -> Dodge All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]