Welcome to AutoBoardz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

1967 Pontiac 400 code WS engine-complete carb to pan-casti..

 
   AutoBoardz (Home) -> GM RSS
Next:  ====>>> Cheap Marlboro cigarettes == jim  
Author Message
Dwight D. Eisenhower

External


Since: Apr 05, 2008
Posts: 84



(Msg. 1) Posted: Fri Apr 25, 2008 4:19 am
Post subject: 1967 Pontiac 400 code WS engine-complete carb to pan-casting 670
Archived from groups: alt>autos>gm (more info?)

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=004&sspage...e=STRK%

 >> Stay informed about: 1967 Pontiac 400 code WS engine-complete carb to pan-casti.. 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Pontiac Bonneville 2000 - Engine died while driving - I have a Pontiac Bonneville 2000 with 94,200 miles (Automatic transmission) and just a month ago it started to have problems; I was driving and out of sudden the engine died, so I pulled over and have to wait at least 1 minute to get the engine start..

'02 Pontiac Grand Am GT Engine Temp Rise when Idling - After driving with the engine warmed up to normal temp (around 200), when i get stuck in traffic or at stop lights my engine temp slowly inches up to the 230-250+ range. I've had a new thermostat installed and had the coolant flushed, but it still does....

No power, complete shut down - A few nights ago I had forgot to turn the Dom light off and had ran the battery down. Since my old battery needed to be replace anyway in a few months, I just got a new battery. I put the battery in and nothing works-- it is like there isn't a battery in...

215 Carb needed - I have a 62 Buick Special with a 215 Aluminum block V8, and I'm having one heck of a time finding a carb for it. I just want a two barrel that will fit it, but I dont want to have to pay over 150$ for a refurb, I don't mind rebuilding. Anyone know where ...

rochester 2b carb adjustments - I have a 1980 malibu with a V6. The car idles fine in park, but when I put it in gear, the idle turns rough. I looked and could not find any adjustment screws. Any ideas ?
   AutoBoardz (Home) -> GM All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]