 |
|
|
|
Next: O2 Sensor going bad.
|
| Author |
Message |
External
Since: Apr 25, 2007
Posts: 8
|
(Msg. 1) Posted: Sun Dec 16, 2007 3:14 pm
Post subject: 307 110 HDI grinding sound when cold
Archived from groups: alt>autos>peugeot (more info?)
|
|
|
Hi,
My 307 SW HDI 110 has started making a strange grinding/rumbling sound
when cold. I noticed it when pulling out of a car park and I thought
there was a branch under the car or the plastic cover under the engine
had dropped off and was dragging. It sometimes makes the noise when
stationairy and out of gear also. It usually doesn't do it when the
car just started but withing 10-50secs. I've noticed turning the air
con on or lights can make it work. The sound only lasts for a short
while, no more than 1 minutes and doesn't occur again until the car is
started from cold.
Once I caught it making the noise I had time to open the bonnet. It
sounded like the noise was coming from the area around the belt
driving the alternator. I noticed when the noise was being made that
the tensioner on the belt moved around a lot more !
I popped the car into a peugeot garage to get the crankshaft pulley
checked as I'd heard that these can give way. They had a quick look
and said it looked find and the belt tension was fine. The engine
sounded fine when they looked because the car was warm.
Any idea's ? |
|
| Back to top |
|
 | |
External
Since: Jan 25, 2007
Posts: 413
|
(Msg. 2) Posted: Mon Dec 17, 2007 6:51 pm
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Dec 27, 2006
Posts: 88
|
(Msg. 3) Posted: Mon Dec 17, 2007 9:09 pm
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Mon, 17 Dec 2007 18:51:38 +0000, Chrs <chris RemoveThis @orbsrealm.com> wrote:
>Replace the belt tensioner which i think you will find that is the
>problem..also replace the drive belt at the same time.
I would go for the pulley personally. Any signs of metal filings
around the cover adjacent to the pulley? >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
External
Since: Apr 25, 2007
Posts: 8
|
(Msg. 4) Posted: Tue Dec 18, 2007 4:26 am
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 18 Dec, 11:40, "Gary G Jones" <ggjggjnos... DeleteThis @btopenworld.com> wrote:
> I had a grinding sound from my 406 HDI, it turned out to be the alternator
> bearings destroying themselves.
> New alternator and all was well again.
> GGJ
>
> "swebb99" <sweb... DeleteThis @gmail.com> wrote in message
>
> news:25966992-0033-403f-9ca5-e59fcbdb22f6@i72g2000hsd.googlegroups.com...
>
> > Hi,
>
> > My 307 SW HDI 110 has started making a strange grinding/rumbling sound
> > when cold. I noticed it when pulling out of a car park and I thought
> > there was a branch under the car or the plastic cover under the engine
> > had dropped off and was dragging. It sometimes makes the noise when
> > stationairy and out of gear also. It usually doesn't do it when the
> > car just started but withing 10-50secs. I've noticed turning the air
> > con on or lights can make it work. The sound only lasts for a short
> > while, no more than 1 minutes and doesn't occur again until the car is
> > started from cold.
>
> > Once I caught it making the noise I had time to open the bonnet. It
> > sounded like the noise was coming from the area around the belt
> > driving the alternator. I noticed when the noise was being made that
> > the tensioner on the belt moved around a lot more !
>
> > I popped the car into a peugeot garage to get the crankshaft pulley
> > checked as I'd heard that these can give way. They had a quick look
> > and said it looked find and the belt tension was fine. The engine
> > sounded fine when they looked because the car was warm.
>
> > Any idea's ?
Thanks for the idea's guys. I've had to drop the car into the garage
again. Last night on the motorway I could here a clicking like a relay
in the glovebox, it clicked every now and again very quickly on/
off(??) at the same time I noticed the front lights gave a flicker
like they were either being dipped or turned off for a fraction of a
second. It only seemed to do this about 70 and below that the clicking
stopped.
The grinding noise now only seems to happen when the car is moving in
gear or out and still only when cold.
I've asked the garage to check out both problems, they may be related.
As for the Pulley the first time I took it in they had a quick check
for metal fillings and didn't find any.
Puzzled 
Hopefully they will spot something today when they start the car from
cold.
Thanks
Steve >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
External
Since: Oct 16, 2006
Posts: 85
|
(Msg. 5) Posted: Tue Dec 18, 2007 11:40 am
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I had a grinding sound from my 406 HDI, it turned out to be the alternator
bearings destroying themselves.
New alternator and all was well again.
GGJ
"swebb99" <swebb99 RemoveThis @gmail.com> wrote in message
news:25966992-0033-403f-9ca5-e59fcbdb22f6@i72g2000hsd.googlegroups.com...
> Hi,
>
> My 307 SW HDI 110 has started making a strange grinding/rumbling sound
> when cold. I noticed it when pulling out of a car park and I thought
> there was a branch under the car or the plastic cover under the engine
> had dropped off and was dragging. It sometimes makes the noise when
> stationairy and out of gear also. It usually doesn't do it when the
> car just started but withing 10-50secs. I've noticed turning the air
> con on or lights can make it work. The sound only lasts for a short
> while, no more than 1 minutes and doesn't occur again until the car is
> started from cold.
>
> Once I caught it making the noise I had time to open the bonnet. It
> sounded like the noise was coming from the area around the belt
> driving the alternator. I noticed when the noise was being made that
> the tensioner on the belt moved around a lot more !
>
> I popped the car into a peugeot garage to get the crankshaft pulley
> checked as I'd heard that these can give way. They had a quick look
> and said it looked find and the belt tension was fine. The engine
> sounded fine when they looked because the car was warm.
>
> Any idea's ? >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
External
Since: Apr 25, 2007
Posts: 8
|
(Msg. 6) Posted: Tue Dec 18, 2007 12:55 pm
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 18 Dec, 18:47, Chrs <ch... DeleteThis @orbsrealm.com> wrote:
> if they start it from cold ?or get some kid that starts it and dont
> listen for the noises
Yes well they tried it this afternoon and didn't hear anything so I'm
going over tomorrow morning to see if I can show them what the problem
is ! >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
External
Since: Jan 25, 2007
Posts: 413
|
(Msg. 7) Posted: Tue Dec 18, 2007 6:47 pm
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Apr 25, 2007
Posts: 8
|
(Msg. 8) Posted: Wed Dec 19, 2007 2:27 am
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 18 Dec, 20:55, swebb99 <sweb....RemoveThis@gmail.com> wrote:
> On 18 Dec, 18:47, Chrs <ch....RemoveThis@orbsrealm.com> wrote:
>
> > if they start it from cold ?or get some kid that starts it and dont
> > listen for the noises
>
> Yes well they tried it this afternoon and didn't hear anything so I'm
> going over tomorrow morning to see if I can show them what the problem
> is !
Typical went to the garage this morning to demo the problem and it
didn't do it, well hardly, not enough to really track it down, just
heard a few slight clicks and knocks which from under the bonnet
sounded like the alternator ... arrrggggg
Seems the be worse the colder it is, which makes me think is bearing
related. >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
External
Since: Apr 25, 2007
Posts: 8
|
(Msg. 9) Posted: Wed Dec 19, 2007 4:41 am
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On 19 Dec, 10:57, Marc Amsterdam <re....TakeThisOut@newsgroup.only> wrote:
> On Wed, 19 Dec 2007 02:27:13 -0800 (PST), swebb99 <sweb....TakeThisOut@gmail.com>
> wrote:
>
>
>
> >On 18 Dec, 20:55, swebb99 <sweb....TakeThisOut@gmail.com> wrote:
> >> On 18 Dec, 18:47, Chrs <ch....TakeThisOut@orbsrealm.com> wrote:
>
> >> > if they start it from cold ?or get some kid that starts it and dont
> >> > listen for the noises
>
> >> Yes well they tried it this afternoon and didn't hear anything so I'm
> >> going over tomorrow morning to see if I can show them what the problem
> >> is !
>
> >Typical went to the garage this morning to demo the problem and it
> >didn't do it, well hardly, not enough to really track it down, just
> >heard a few slight clicks and knocks which from under the bonnet
> >sounded like the alternator ... arrrggggg
>
> >Seems the be worse the colder it is, which makes me think is bearing
> >related.
>
> they had the car in the garage overnight?
Yes because they wanted to run it from stone cold. There was a small
noise for a short time but nothing like the racket it sometimes makes. >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
External
Since: Jul 09, 2006
Posts: 8
|
(Msg. 10) Posted: Wed Dec 19, 2007 11:57 am
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Imported from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Jan 25, 2007
Posts: 413
|
(Msg. 11) Posted: Wed Dec 19, 2007 9:34 pm
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Dec 30, 2007
Posts: 8
|
(Msg. 12) Posted: Sun Dec 30, 2007 3:53 pm
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Dec 19, 9:34 pm, Chrs <ch... RemoveThis @orbsrealm.com> wrote:
> It sounds like a alternator bearing, when it gets hot it will make a
> very loud noise,getting ready to go BANG.remove the fan belt and start
> the engine up to see if the noise has gone.if not it could be water
> pump?
> good luck finding it ..
Been offline for a bit, so I may be too late to answer this.
What year is the 307? They changed the crankshaft pulley early on (pre
52 reg), and the new type does not disintegrate, it is very similar to
the XUD type, you know the type I mean Chris????
Anyway, this type also has a different alternator pulley with some
sort of freewheel device built into it. I understand that this can
give up, and cause noise. This could also affect the drive to the
alternator, which in turn could cause relay issues.
The tensioners normally don't give a problem on this model.
Brian. >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
External
Since: Jan 25, 2007
Posts: 413
|
(Msg. 13) Posted: Mon Dec 31, 2007 1:08 pm
Post subject: Re: 307 110 HDI grinding sound when cold [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Yes after many times trying too get one,then getting one and finding
out it was the wrong one,but in the end i got one and replaced it with
out any problem ,(just got to do the fan belt up a little bit more as
it makes bit of noise first thing)well i hope it is the fan belt lol
lol >> Stay informed about: 307 110 HDI grinding sound when cold |
|
| Back to top |
|
| |
| Related Topics: | Pressing Lock Button twice on 307 HDI 52 plate makes horn .. - Pressing Lock Button twice on 307 HDI 52 plate makes horn sound. The horn does also function normally. Is this normal?
307 1.6 rattle - Hi all, I have a 2004, 307 1.6, when I let my car idle or when travelling at low speed I get a terrible rattle/knocking noise coming from the front. Any ideas what could be causing it? Tx Matthew
307 abs Fault- Any advice please - Have the 307 HDi XSi 136. Advice anyone about an ABS Malfunction which locked my wheels and managed to hurt my kids when they were hurtled forward. Just grateful that I wasn't travelling too fast. Peugeot have said car is fine, despite local garage..
307 D Turbo power loss - Hi Guys, ive had my 2003 307 D Turbo for 1 month now, it has been working fine until now. it has suddenly lost power - no indication on the onboard screen. i cant get over 70-75 on the motor way and loose power rapidly on an incline. ive put in diesel...
Goodbye 307 HDI - the new fuel system that was required and now just just found out that the crankshaft pulley needs changing has done it for me,px'ed it in for honda civic ctdi se which i'm collecting on sat,i've had 2 bad experiences with pug's and their cust service... |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
