Removing the hub is likely to create a problem on this car. Remove the
rotor and caliper, and there should be enough room to knock the stud out
the back. If not, you may need to cut it off.
When installing the new stud, if additional clearance is needed, grind a
flat spot on one side of the back of the stud.
--
Message posted using
http://www.talkaboutautos.com/group/alt.autos.hyundai/
More information at
http://www.talkaboutautos.com/faq.html >> Stay informed about: 04 wheel stud problem diy