front end "clunk" on '99 crv....

I had the same problem with my '97 V. Ended up being the front stabilizer
links one on each side. It was like driving a new car!


"teefus" wrote in message

> new here, just had a front end question about my '99 crv. the
> passenger side has a pronounced "clunk" when hitting a small to
> medium sized bump in the road. the shop/lot i bought it from in may
> '04 said they replaced that ball joint and it got better but it is
> still there to some degree. any thoughts? thanks in advance.
>
> --
> Posted using the http://www.autoforumz.com interface, at author's request
> Articles individually checked for conformance to usenet standards
> Topic URL:
> http://www.autoforumz.com/front-end-quot-clunk-quot-99-crv-ftopict142639.html
> Visit Topic URL to contact author (reg. req'd). Report abuse:
> http://www.autoforumz.com/eform.php?p=689012
 >> Stay informed about: front end "clunk" on '99 crv.... 

teefus wrote in


> new here, just had a front end question about my ’99 crv. the
> passenger side has a pronounced "clunk" when hitting a small to
> medium sized bump in the road. the shop/lot i bought it from in may
> ’04 said they replaced that ball joint and it got better but it is
> still there to some degree. any thoughts? thanks in advance.
>


Different year, but might be the same fix:
http://www.tegger.com/hondafaq/tsb/crv/x98-050e.pdf

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
 >> Stay informed about: front end "clunk" on '99 crv.... 

teefus wrote:

> new here, just had a front end question about my ’99 crv. the
> passenger side has a pronounced "clunk" when hitting a small to
> medium sized bump in the road. the shop/lot i bought it from in may
> ’04 said they replaced that ball joint and it got better but it is
> still there to some degree. any thoughts? thanks in advance.
>
Hi, I had a similar experience just like yours with my 99 CRV. I spent a
lot of money with so many guesing works in so many repairing shops.
Finally this problen caused by harden and loosen mounting rubber parts
with the stabilizer bar support. You may simply change the rubbers part
or just add some rubber pieces between the bar and old parts.

David
 >> Stay informed about: front end "clunk" on '99 crv....