best suggestion, take it back and describe the problem and take the mechanic
out for a spin. Odds are, its just a simple adjustment.
- Keith
Tallahassee, FL
"Aron" <drenkav1913.RemoveThis@earthlink.ten> wrote in message
news:Twm2d.2017$0i5.489@newsread3.news.pas.earthlink.net...
> I'm not an expert on the Odyssey but maybe it is your torque converter
> locking and unlocking that is giving you that feeling around 40. If you
see
> a change of say 250 RPM or so (less RPM difference than a gear change)
with
> each "in" and "out" then that's probably what that is. Weather or not
that
> is a problem on a 2000 Odyssey, I don't know. It may just be a speed
where
> the normal operation becomes noticeable.
>
> Aron
>
> "Perry Templeton" <perrylep.RemoveThis@bellsouth.net> wrote in message
> news:cQZ1d.149678$_h.68521@bignews3.bellsouth.net...
> > I have a 00 Odyssey. 49K. Transmission replaced a couple of weeks ago.
> > Seems ok. But I have noticed it shifts harder from 1st to 2nd than any
> > other. And if I hang my speed at around 40mph, it seems that the
> > transmission is in/out, in/out, kinda of stumbling in and out.
> > Any input?
> > Perry
> >
> >
>
><!-- ~MESSAGE_AFTER~ -->
>> Stay informed about: Transmission stumbling at 40mph